Bluecoat - Endring Remover

Application

Endring Remover is used for removing endrings out of the Rotary Nickel Screen.

Properties

As the product is aggressive in nature & irritating, protect the skin & cloth. Working room should be properly ventilated.

Procedure

Take Endring Remover in bucket & immerse the endring in the liquid & allow the adhesive (glue) to soften for approximately 25 to 30 minutes. Remove the endring by inserting a razor blade between screen & endring. Adhesive (glue) can be wiped of with cloth.

Safety

Always wear hand gloves, & protect the eyes by wearing glass. Incase Chemical comes in contact with skin, wash the skin with water.

Shelf Life

Unlimited, if stored between 0° C & 10° C . Keep the container tight.

Packing

35 Kgs. plastic carbouy.

We recommend that before using our product in full scale production, the customer should make his own tests to determine the suitability of the product for his own purpose under his own operating conditions. Since the circumstances under which our product is stored, handled & used, are beyond our control, we cannot assume any responsibility of their use by the customer.